Precor Vitality Series Shoulder Press
The Precor Vitality Series Shoulder Press features comfortable, oversized grips with multiple positions to accommodate a broad range of user sizes.
$2,150
Availability: 1 in stock
Due to offline & phone sales stock levels may not always be accurate in real-time. In the rare case you buy an out-of-stock equipment we will refund you immediately.
The Precor Vitality Series Shoulder Press features comfortable, oversized grips with multiple positions to accommodate a broad range of user sizes. An adjustable seat pad for desired start position and proper form helps with sound biomechanics. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
| General Features | Oversized press grips with multiple hand positions. Adjustable seat pad for desired start position. Weight Stack 200 lbs (91 kg). |
| Instructional Placard | Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts. |
| Adjustments | Seat and back pad adjustments feature custom-molded sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is color-coded for easy identification. Viewing hold and etched numbers on sleeve-tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter. |
| Weight Stack | Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods. Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lbs / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy – no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards. |
| Frame and Finish | 11 gauge (2.75 mm) 2×4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver). |
| Upholstery | Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm). |
| Pulleys and Cables | Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation. |
| Bearings and Pivot Points | ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension). |
| Water Bottle and Accessories Holder | Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder. |
| Rubber Feet | Yes |
Buy Precor Vitality Series Shoulder Press online. If you are interested in the Precor Vitality Series Shoulder Press for sale, please enquire above.
Features:
Equipment Specifications
| Weight Stack | 200 lbs / 91 kg |
| Add-on Weight Stack (lbs / kg) | 5 lbs / 2.5 kg |
| Workout Area (L x W) | 62 x 56 inches / 158 x 142 cm |
| Standard Frame Colors | Experience Titanum |
| Standard Upholstery Colors | Black |
| Optional Upholstery Colors | NONE |
Equipment Dimensions and Weight
| Length | 59 inches / 150 cm |
| Width | 56 inches / 142 cm |
| Height | 57 inches / 145 cm |
| Equipment Weight | 430 lbs / 195 kg |
Cleaned & Serviced
Related products
-
SKU: FW-93
-
SKU: LFT-PN5147
-
SKU: TEC-PN6734-1
-
SKU: TEC-BN7457
-
SKU: TEC-PN2011
